Drum transfer pumps
TRA Pneumatic Motor
- Max flow rate 70 l/min
- Viscosity up to 600 cps
AUTOMOTIVE
CHEMICAL INDUSTRY
OIL & GAS
DATA
Performance
* The performance values refer to primed pumps (with water at 20°C) with open outlet and vary based on the construction materials.
** Attention: average values of the different materials configurations for ball and ball seat.
DATA
Technical Specifications
Technical Specifications
| Viscosity | up to 600 cps |
| Max flow rate* | 70 l/min |
AISI 316 casing
| Dip tube | Ø 42,5 mm |
| Hose holder | Ø 25 mm |
| Operating temperature | da 3° a 95° C |
| Total weight in kg | 4,3 for lenght of 900 mm · 5,3 for lenght of 1200 mm |
| Dip tube material | AISI 316 |
| Material Shaft | AISI 316 |
| Material impeller | ECTFE |
| Material suction outlet | ECTFE |
| Material seal gasket in contact with the fluid – MIM | Viton® |
| Lenght mm | 900 o 1200 |
AISI 316
Pneumatic motors technical specifications: (standard pneumatic motor)
| Power | 0,42 HP (300 Watt) |
| Max flow rate | 70 l/min |
| Viscosity | 600 cps |
| Density | 1,2 g/cm3 |
| Weight in kg | 1,1 |
ATEX motor available on request – for information contact the sales office.
Accessories
- Polypropylene or PVDF flow meter
- Polypropylene, PVDF, aluminium, stainless steel dispensers
- T-bolt clamps for spiral hoses
- Reinforced hose in food-grade PVC with metal reinforcement
- Polypropylene or stainless steel dip tube filter
CONTACT
Ask for more information
TECHNICAL SHEETS
