* The performance values refer to primed pumps (with water at 20°C) with open outlet and vary based on the construction materials.
** Attention: average values of the different materials configurations for ball and ball seat.
|Viscosity||fino a 900 cps|
|Max flow rate *||90 l/min|
|Dip tube||Ø 42 mm|
|Hose holder||Ø 25 mm|
|Operating temperature||da 3° a 65° C|
|Total weight in kg||1,4 for lenght of 900 mm · 1,7 for lenght of 1200 mm|
|Material dip tube||Polypropylene|
|Material shaft||HASTELLOY or AISI 316|
|Material suction outlet||Polypropylene|
|Material seal gasket in contact with the fluid – MIM||Viton®|
|Lenght mm||900 or 1200|
|Voltage||230 V monofase|
|Max flow rate||90 l/min|
|Weight in kg||3,8|
NB: The electric cable is supplied without socket.
ATEX motor available on request – for information contact the sales office
- Polypropylene or PVDF flow meter
- Polypropylene, PVDF, aluminium, stainless steel dispensers
- T-bolt clamps for spiral hoses
- Reinforced hose in food-grade PVC with metal reinforcement
- Polypropylene or stainless steel dip tube filter