Drum transfer pumps
TRA Electric Motor
- Max flow rate 90 l/min
- Viscosity up to 900 cps
AUTOMOTIVE
OIL & GAS
DATA
Performance
* The performance values refer to primed pumps (with water at 20°C) with open outlet and vary based on the construction materials.
** Attention: average values of the different materials configurations for ball and ball seat.
DATA
Technical Specifications
Technical Specifications
| Viscosity | up to 900 cps |
| Max flow rate * | 90 l/min |
AISI 316 casing
| Dip tube | Ø 42,5 mm |
| Hose holder | Ø 25 mm |
| Operating temperature | da 3° a 95° C |
| Total weight in kg | 4,3 for lenght of 900 mm · 5,3 for lenght of 1200 mm |
| Material dip tube | AISI 316 |
| Material shaft | AISI 316 |
| Material impeller | ECTFE |
| Material suction outlet | ECTFE |
| Material Seal gasket in contact with the fluid – MIM | Viton® |
| Lenght mm | 900 o 1200 |
AISI 316
Electric motors technical specifications
| Power | 800 Watt |
| Voltage | 230 V monofase |
| Class | F |
| Max flow rate | 90 l/min |
| Viscosity | 900 cps |
| Density | 1,6 g/cm3 |
| Weight in kg | 3,8 |
NB: The electric cable is supplied without socket.
ATEX motor available on request – for information contact the sales office.
Accessories
- Polypropylene or PVDF flow meter
- Polypropylene, PVDF, aluminium, stainless steel dispensers
- T-bolt clamps for spiral hoses
- Reinforced hose in food-grade PVC with metal reinforcement
- Polypropylene or stainless steel dip tube filter
CONTACT
Ask for more information
TECHNICAL SHEETS
