POMPES PNEUMATIQUES À DOUBLE MEMBRANE
Boxer 7
- Débit maximal: 9 l/min
- Raccords aspiration / refoulement: G 1/4″ f

ATEX ZONE 2 - STANDARD SUR TOUS LES MODÈLES
II 3G Ex h IIB T4 Gc
II 3D Ex h IIIB T135°C Dc
ATEX ZONE 1 - SUR DEMANDE
II 2G Ex h lib T4 Gb
II 2D Ex h IIIB T135°C Db

AUTOMOBILE

ÉPURATION DES EAUX USÉES ET DES BOUES

INDUSTRIE CÉRAMIQUE, PIERRES, MARBRES, VERRE ET INDUSTRIE MINIÈRE

INDUSTRIE CHIMIQUE

INDUSTRIE DES PEINTURES

INDUSTRIE GALVANIQUE ET ÉLECTRONIQUE

INDUSTRIE GRAPHIQUE

CONDITIONNEMENT, COLLE, PAPIER ET PAPÈTERIE
VALEURS
Performances

* Les performances indiquées se réfèrent aux pompes amorcées (avec fluide eau à 20 °C) en roue libre et varient en fonction des matériaux de composition.
** Attention: valeurs moyennes des différentes configurations de matériaux pour bille et sièges de bille.
VALEURS
Caractéristiques techniques
Hauteur manométrique/Débit garanti selon la norme ISO 9906
Raccords aspiration / refoulement | G 1/4″ f |
Raccord air | G 1/8″ f |
Débit max * | 9 l/min |
Pression air alimentation max | 8 bar |
Hauteur manométrique max * | 80 m |
Aspiration max pompe montée en charge – à sec ** | 4 m |
Aspiration max pompe montée en charge – avec pompe amorcée | 9,5 m |
Diam. Max résidus solides en suspension | 0,5 mm |
Bruit ** | 65 dB |
Volume par cycle | 3,2 cc |
PP PVDF
Version | Poids | Min | Max |
PP (avec proportion verre) | 0,7 kg | 3° C | 65° C |
PP conducteur (avec proportion carbone) | – | 3° C | 65° C |
PVDF | – | 3° C | 95° C |
Dimensions maximales | Plastique |
Hauteur | 120 mm |
Largeur | 138 mm |
Profondeur | 68 mm |
VALEURS
Raccords

A1 – A2 – A4 – M1 – M2 – M4
RACCORDS STANDARDS
M1 – A1
ASPIRATION
A1 – A2 – A3 – A4 – A5 – A6
REFOULEMENT
M1 – M2 – M3 – M4 – M5 – M6
MULTIMÉDIA
Vidéos
CONTACTS
Demander des informations
FICHES TECHNIQUES